Adelakin, Tunde K. 2009. An Experimental Study of Aluminum Boride Particles Distribution in Centrifugally Cast Al/AlBX Composites.  1.8 MB.

Álvarez-Hernández, Ángel R. 2005. Combined Flow and Heat Transfer Characterization of Open Cell Aluminum Foams. 1.1 MB.

Angeles-Malaspina, Moisés E. 2005. An Assessment of Future Caribbean Climate Change Using "Business as Usual" Scenario by Coupling GCM Data and RAMs. 2.4 MB.

Araya, Juan G. 2004. Transient, Three-Dimensional Numerical Model of Laser Cutting Process in Ceramics with Phase Change Consideration. 1.2 MB.

Barrera-Valero, Osvaldo A. 2006. Preliminary Performance Study of Sherwood Regulator. 910 kb.

Bejarano-Rodríguez, Fernando A. 2007. Crack Identification of a Rotating Shaft with Integrated Wireless Sensors. 819.67 kb. 

Bermúdez-Torres, Erick O. 2007. Design and Mechanical Characterization of a Magnetocaloric Pump. 1.0 MB.

Calderón-Arteaga, Christian H. 2007. Redes neuronales artificiales y funciones de transferencia aplicados a la estimación de humedad de suelo y temperatura del aire. 2.1 MB.

Calderón-Arteaga, Hermes H. 2004. Efectos de la deformación mecánica sobre compuestos de matriz de aluminio tratados térmicamente. 3.2 MB.

Carreño-Chavez, Rolando A. 2004. Natural-Convection Heat Transfer in Supercritical Fluids. 1.5 MB.

Castro-Aguila, Julio C.  2008.  A Screw Theory Approach to Analyze the Dynamics of Parts in a Vibratory Bowl Feeder.  2.6 MB

Castro-Moura, Eslie R. 2004. Vibration-based Stiffness and Damping Matrices Updating of a Composite of a Sandwich Composite Beam. 519 kb.

Cataño-Montoya, Juan E. 2005. Development of a Magnetocaloric Pump for Applications in Heat Pipes. 1.6 MB.

Cecchini, Andrés. 2005. Damage Detection and Indetification in Sandwich Composites Using Neural Networks. 3.4 MB.

Charca-Mamani, Samuel. 2005. Study of Hydrogen Permeation and Diffusion in Steels: Predictive Model for Determination of Desorbed Hydrogen Concentration. 1.6 MB.

Chávarri-Pajares, Erick E. 2007. Polyol Synthesis and Characterization of Magnetic Nanocrystalline Cobalt and Cobalt Platinum. 4.0 MB.

Cornier-Ríos, Harold. 2004. Effect of Recycling on Material Properties of Polyehylene Terephthalate at Various Recycling Ratios and Recycling Generations. 843 kb.

Cruz-Ruiz, Edmundo. 2004. Modelling of Heat Transfer in Open Cell Metal Foams. 2.3 MB.

De Jesus-Rivera, Javier A. 2009. Three Dimensional Dynamic Psychrometric Mapping of a Typical Operating Room in Puerto Rico.  16 MB.

Delgado-Alvarado, Carolina. 2005. A Study of the Corrosion Resistance of Gamma Titanium Aluminide in Ringer's Solution, 3.5 WT%NaCl and Seawater. 2.0 MB.

Díaz-González, James. 2004. Dynamics of Parts on Narrow Tracks Using the Multibody Theory. 4.9 MB.

Díaz-Santiago, Virginia.  2008.  Implementation of a Real-time Multivariate Data Analysis Methodology in Injection Molding and High Frequency Welding Process.  503 kb.

Diazgranados-Jimenez, Jorge A. 2004. Design of an Intravenous Drug Delivery Device. 823 kb.

Duque-Rojas, Nairobi B. 2006. AFM Stidies of Fractured Surfaces of AF1410 Steel and AA7075-T6 Aluminum Alloy. 4.2 MB.

García-Galeano, Eduard A. 2004. Estudio teórico y experimental de modelos para cálculo y control de presiones subatmosféricas durante flujo transitorio. 1.6 MB.

Giordano, Mauricio A. 2009. Study of Bioheat Transfer Processes for Hyperthermia Cancer Treatment.  2.1 MB.

Herger, Edward. 2009.  Characterization of the Dynamic Onset of Fibric Damage in Type I Collagen Fascicles.  6 MB.

Hernández-Mora, Madeline. 2004. Modeling of the Thermal Behavios of a Power Electronic Module. 4.3 MB.

Huertas-Ortecho, Carlos A. 2006. Robust Bird-Strike Modeling Using LS-DYNA. 2.7 MB.

Jaimes-Rolón, Ricardo A. 2006. Diseño asistido por internet para sistemas mecánicos-IAD. 5.8 MB.

Jiman, H. 2005. MRI and CT Image Based on 3D Reconstruction and Medical Rapid Prototyping (MRP). 4.0 MB.

Julca Benites, Oswaldo M. 2007. Detection of Climate Changes Over the Global and Caribbean Basin. 2.5 MB.

Katiyar, Rajesh K. 2009.  Synthesis and Characterization of Cathode Materials for High Energy Density and High Rate Capability Lithium-Ion Rechargeable Batteries.  1.39 MB.

Ke, Sun. 2006. Design and Characterization of Passive Wire;ess Strain Sensor. 2.5 MB.

Lugo-Ortiz, José E. 2009 Development of a Variable Diameter Wheel for Motion Transmission.  1.7 MB.

Maldonado-Fernández, Axel. 2007. Numerical Simulation of the Structure of Time Dependent Homogeneous, Isotropic Turbulence. 366 kb. 

Mantilla-González, Angel R.  2008.  Numerical Study of Two-Phase Turbulent Flow.  1.8 MB.

Marrero-Ortiz. Victor, L. 2003. Numerical Simulation and Experimental Validation of the Re-Design High Tc Current Leads for Astro-E2 X-Ray Spectrometer Detector System. 1.7 MB.

Martínez-Marti, Enrique G. 2006. Flow and Entropy Characteristics around Airfoils in Subsonic and Supersonic Flows. 3.2 MB.

Mazuera-Robledo, Jesús D.  2009.  Synthesis and Characterization of Polyimide Cobalt Ferrite Nanocomposites for Potential Applications in Mems.  1.65 MB.

Medici, Ezequiel F. 2005. Finite Simulations and Optimization of Berdut  Linear Motor for a Novel Elevator System. 2.0 MB.

Melgarejo-Pinto, Zenón H. 2006. Fabrication and Characterization of Functionally Graded AI/AIB₂ Matrix Composites for High Wear Aerospace Applications Using Centrifugal Casting. 4.1 MB.

Meza-Castillo, Omar E. 2003. Analysis of Conduction Heat Transfer in Semi-Infinite Slabs and Infinite Quadrants with Discrete Heat Generation Sources Using Green's Function Integral Methods. 7.1 MB.

Nieves-Flores, Neit J. 2009. Characterization of Bidimensional Geometry Through Solid Modeling Software Using a C++ Interface.  3.2 MB.

Olaya-Luengas, Lilia.  2009.  Characterization of Squeeze-Cast Alb₁₂/Al and Alb₂/Al Composites.  2.49 MB.

Orengo-Rodríguez, José. 2006.  Time Constant Anomaly Detection of Thermocouples using Transient Data. 801 kb. 

Pedraza Torres, Sandra R. 2007. Studies on Directional and Rapid Solidification of Al-B-Cu Composites. 2.8 MB.

Peralta-Serrano, Alexander.  2008.  Innovative Vibration Technique as a Viable Substitute for Conventional Three Point Bending Fatigue Testing.  1.4 MB.

Pérez-Reisler, Rafael A. 2007.  Heat and Mass Transfer Effects in Air-Cooled Vertical Tube Absorbers. 1.1 MB.

Renta-Rosa, Lorraine M.  2009.  On the Selection of Commercially Available Sn-Ag-Cu Pb-Free Balls Components Over Re-Balling the Components with Sn37Pb Balls to Comply with the Restriction of Hazardous Substances Directive in the Aerospace Industry.  1.94 MB.

Renteria-Beleño, Boris. 2007. Preparation and Characterization of Polyaniline-Based Magnetic Nanocomposites for EMI Shielding Applications. 7.5 MB.

Riccetti, Miguel. 2009. Optimization and Characterization of a Magnetocaloric Pump Using Ferrofluids.  2.3 MB.

Reyes-Russi, Luvina. 2007. Synthesis and Characterization of (AlMg)B₂- Aluminum Based Composites and Nanocomposites. 3.1 MB.

Robles-Nieves, Victor. 2004. Static and Dynamic Analysis of a Piping System. 1.1 MB.

Rodríguez-Gutierrez, Radhames de J.  2007.  Analysis of Thermal Conductivity of Ferrofluids.  1.2 MB.

Rojas-Gordillo, Iván. 2005. Análisis de exergía en dos puntos críticos en una industría productora de harina de pescado. 1.1 MB.

Rosales-Niño, Oscar M. 2007. Hydrogen Transport Behavior and Phase Decomposition of Aisi-321 Austenitic Stainless Steel Via Cathodic Polarization. 2.4 MB.

Ruiz-Mercado, Ana M. 2007.  Surface Response Analysis of Electrospun Nanofiber Beads. 10.5 MB.

Ruiz-Valle, Héctor J. 2009. Numerical Analysis of Berdut Linear Electric Motor for Train Propulsion.  2.1 MB.

Santos Cordero, Abigail. 2004. Analyzing The Parts Behavior in a Vibratory Bowl Feeder to Predict the Dynamic Probability Profile. 3.9 MB.

Suárez-Acuña, Jaime. 2005. Generalized Water Hammer Algorithm for Piping Systems with Unsteady Friction. 1.2 MB.

Torres-Díaz, Isaac G.  2007.  Impacts of Low Land Use on a Tropical Montane Cloud Forest Under a Changing Coastal Climate.  2.6 MB.

Velasco-Abreo, Andrés F.  2008.  Preparation of Copper-Bearing Nanofluids for Thermal Applications. 3.1 MB.

Vidal-Urquiza, Glenn C.  2008.  Turbulent Flow Past Over a 3–Dimensional Triangular Bluff–Body Flameholder Using Direct Numerical Simulations.  1.5 MB.

Wang, Ya. 2007. A Passive Wireless Temperature Sensor For Harsh Environment Applications. 877 kb.